PRODUCTS / ALTEA 400 SERIES

ALTEA-415A-230

2-way Powered Point Source

P/N. 10404830

Model
P/N

Features

Lightweight multi-purpose system
Ultra lightweight Class D amplifier with SMPS
User definable 24-bit DSP with LCD screen
Presets: Live, Dance, Vocals, Bass Boost, Vocals & Mode
Stackable 3-band EQ
Standby Mode
Rigging points

Applications

Live sound reinforcement
Speech and vocals
Music playback in entertainment
A/V, and institutional venues

DAScontrol

ALTEA-415A

The new Altea powered systems give you more control over your sound than ever before.
Thanks to the DAScontrolTM interface, tailoring the configuration of the Altea systems to provide the best sound possible is easy.

The ALTEA-415A is a powered portable P.A. system with a multi-angle polypropylene enclosure that allows for use as a stage monitor.

On board is Class D two channel amplifier of exceptional quality providing a total of 800 Wpeak power. of the provides extended bandwidth, wide dynamic range and exceptionally low distortion-features hard to find on other systems in this market segment. Digital Finite Impulse Response (FIR) filters are used in the signal processing of the ALTEA-415A system. User configurable voicing, filter and EQ modes, and gain control are achieved by way of a rotary-knob interface and LCD screen on the rear of the cabinet.

The 15MI4 loudspeaker provides accurate low frequency reproduction with a deep, powerful bass. High frequencies are handled by the M-32 FEM optimized compression driver with 1″ exit offering excellent performance.

Performance
Frequency Range (-10 dB)50 Hz – 20 kHz
Horizontal Coverage (-6 dB)90º
Vertical Coverage60º
Maximum Peak SPL at 1 m128 dB
Electronics and Connectors
Nominal Amplifier Power (continuous)400 W
Nominal Amplifier Power (peak)800 W
Input TypeBalanced
Input Impeadance20 kohms
Input Sensitivity1.95 V (+8 dBu)
Audio Signal Input Connector2 x Female XLR
Audio Signal Loop Thru Connector1 x Male XLR
ControlDAScontrol™
AC Input ConnectorIEC
Operating Range180-250 VAC
Current Draw 230 V1.0 A
Enclosure
Enclosure ConstructionPolypropylene
Enclosure GeometryTrapezoidal
RiggingM8 Rigging Points
FinishTextured
ColorBlack
Dimensions ( H x W x D )710 x 440 x 380 mm
28,0 x 17,3 x 15,0 in
Net Weight17,5 kg ( 38,6 lb )
Components
LF Driver15MI4
HF DriverM-32
Shipping
Carton Dimensions ( H x W x D )805 x 530 x 445 mm
31,7 x 20,9 x 17,5 in
Shipping Weight21,0 kg ( 46,3 lb )
TitleFormatSize
Data Sheet
HT_ALTEA415A230_00.pdfPDF299 Kb
User Manual
UM_AL1_01_EN.pdfPDF5.72 Mb
Line Drawing
LD_2D_AL415A.dwgDWG1.91 Mb
LD_2D_AL415A.svgSVG445 Kb
ANL-1Set of 4 M8x13 forged steel eyebolts+4 carabiners, for flying
AX-112-5Wall mount bracket for DR-512/DR-512A/DR-515/DR-515A, WLL=25kgf, black
FUN-AL715Protective transport cover for 1 u. ALTEA-715/ALTEA-715A/ALTEA-415/ALTEA-415A, black
TRD-2Aluminum speaker stand for all models with 35mm pole mount socket, black
TRD-6Ring lock pole mount for use between satellite and sub system, black
15MI4Low-mid frequency 15″ speaker, 2.5″ VCD, ferrite magnet, 300 W AES, 4 ohm
DSP-ALTEA-415ASpare DSP for ALTEA-415A
GM-15MI4Recone kit for 15MI4 speaker
GM-M32Diaphragm for M-32 compression driver
M-32Compression driver, 1″ VCD, ferrite magnet, 1″ throat, 40 W AES, 4 ohm
MP-ALTEA-415A- 230Complete power module for ALTEA-415A-230