2-way Powered Point Source

P/N. 10427253



Active biamp system
Dual-channel 1000 Wpeak Class D amplifier
Birch plywood enclosure
Durable ISO-flex paint 
DAScontrol™ interface for easy setup and adjustment
DSP with presets and LCD screen


Live sound reinforcement
Bands, DJ´s and performers
Speech and vocals
Music playback in entertainment
A/V, conferences and presentations


Logo Action 500

The ACTION-500 active systems incorporate a mixer with 2 inputs. DAScontrol ™ technology with LCD screen allows for the selection of up to 3 different presets (Live, Dance and Monitor) and HPF and LPF filters that optimize the systems when used with subwoofers. The powered systems provide the option of using the logo as a limit indicator.

ACTION-525A is an active system composed of two 15MI speakers that deliver a greater SPL than the simple 15” plus enhanced bass for events that require both powerful sound and simple adjustment. 

As part of our company culture, all our systems are developed under a single philosophy: to deliver the highest possible quality in terms of both materials and overall system design. In the ACTION-500 series we use the same birch plywood as our touring systems for a tight, natural warm sound found nowhere else on the market. The series’ full range of active tops is complete with two balanced XLR inputs for mic and line, an additional 3.5 mm mini jack input, and a powerCON connection. 

The DAScontrol™ interface uses a high-range 24-bit DSP and rear LCD screen to enable the selection of presets, EQ modes, delay, gain control and signal source mix.
Frequency Range (-10 dB)45 Hz – 20 kHz
Horizontal Coverage (-6 dB)90º
Vertical Coverage60º
Maximum Peak SPL at 1 m134 dB
Electronics and Connectors
Nominal Amplifier Power (continuous)500 W
Nominal Amplifier Power (peak)1000 W
Input TypeBalanced
Input Impeadance20 kohms
Input Sensitivity1.95 V (+8 dBu)
Audio Signal Input Connector2 x Female XLR
AUX Input1 x 3.5 mm Mini Jack
Audio Signal Loop Thru Connector1 x Male XLR
AC Input ConnectorpowerCON NAC3MPA
Operating Range90-127/180-250 VAC
Current Draw 115 V2.2 A
Current Draw 230 V1.1 A
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingM10 Rigging Points
FinishISO-flex Paint
Dimensions ( H x W x D )1.090 x 445 x 515 mm
42,9 x 17,5 x 20,3 in
Net Weight39,5 kg ( 87,1 lb )
LF Driver15MI
HF DriverM-44
Carton Dimensions ( H x W x D )1.165 x 515 x 560 mm
45,9 x 20,3 x 22,1 in
Shipping Weight43,5 kg ( 95,9 lb )
Data Sheet
HT_ACTION525A_00.pdfPDF388 Kb
User Manual
UM_ACT5A_01_EN.pdfPDF5.67 Mb
CAT_ACTION500_01.pdfPDF7.09 Mb
CAT_DAS_2019_FULL_LINE_01.pdfPDF26.9 Mb


Action 500 is an evolution of the Action series, delivering same powered and passive sound with enhanced design and performance. Perfect for any event that needs a portable sound system that is both powerful and easy to adjust.

ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
FUN-VT215Protective transport cover for 1 u. ACTION-525/ACTION-525A, VANTEC-215/VANTEC-215A, black
15MILow-mid frequency 15″ speaker, 2.5″ VCD, ferrite magnet, 300 W AES, 8 ohm
BC-91690 x 60 horn, polyamide with fiber, 1″ throat
GM-15MIRecone kit for 15MI speaker
GM-M44Diaphragm for M-44 compression driver
M-44Compression driver, 1.75″ VCD, ferrite magnet, 1″ throat, 60 W AES, 8 ohm
MP-ACT525AComplete power module for ACTION-525A