PRODUCTS / EN54 SERIES

WR-6415-CX

2-way Passive Point Source

P/N. 10428070

Model
P/N

Features

EN54-24 certified for use in voice alarm systems
2-way system for outdoor installation
CX finish (ISO-flex) for covered exposure
IP56 ingress protection rating
15AV woofer with 3” voice coil
M-75 compression driver with 3″ diaphragm
Rotatable 60º x 40º horn design
Stainless steel fixing points

Applications

Professional installation systems
Houses of worship
Auditoriums/Theaters
Theme parks
Outdoor Applications

WR Series

The DAS EN54-24 certified speakers are ideal for use in life safety applications or anywhere clear, powerful high-quality audio is needed. Thanks to their robustness and certified performance under climatic and mechanical conditions, the EN54-24 models are suitable for use in voice evacuation systems, both indoors or extreme outdoor environments.

The WR6415-CX employs a 15AV woofer for low frequency reproduction. A M-75 compression driver with 3″ titanium diaphragm attached to a 60º x 40º rotatable horn provides brilliant highs. The rugged birch plywood cabinet construction is available in black, white or military grey, depending on the finish.

The WR-6415-CX offers two exposure ratings: CX (covered exposure) for applications where cabinets are covered or protected, and DX (direct exposure) where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex polyurea coating on the exterior surface. The DX versions augment the protection rating by employing a fiberglass exterior. Stainless steel fittings and mounting hardware are offered on both versions.
Performance
Frequency Range (-10 dB)55 Hz – 20 kHz
Horizontal Coverage (-6 dB)60º
Vertical Coverage40º
Nominal Impedance8 ohms
RMS Power Handling400 W
Peak Power Handling1600 W
On-axis Sensitivity 1W/1 m99 dB SPL
Maximum Peak SPL at 1 m131 dB
Recommended AmplifierDX-80-230
DX-80-115
Recommended ProcessorDSP-2040
Connectors
Audio Input ConnectorBarrier Strip
Audio Output ConnectorBarrier Strip
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingM10 Rigging Points
FinishISO-flex Paint
ColorBlack
IP RatingIP-56
Dimensions ( H x W x D )775 x 465 x 460 mm
30,5 x 18,3 x 18,1 in
Net Weight28,0 kg ( 61,6 lb )
Components
LF Driver15AV
HF DriverM-75
Horn/WaveguideBC-64AL
Shipping
Carton Dimensions ( H x W x D )842 x 525 x 535 mm
33,1 x 20,7 x 21,1 in
Shipping Weight36,0 kg ( 79,4 lb )
TitleFormatSize
Data Sheet
HT_WR6415_02.pdfPDF664 Kb
User Manual
UM_WR1_01_EN.pdfPDF5.54 Mb
Modeling Data
MD_WR_EF3_GLL.zipZIP247 Kb
Line Drawing
LD_2D_WR6415.dwgDWG314 Kb
LD_2D_WR6415.svgSVG69 Kb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
AX-SPG128 mm TV clamp spigot adapter with M10 thread for AXU/AXF brackets
AXC-ATC-clamp for using mounts with lighting truss
AXU-WR6415“U” bracket, wall/ceiling/truss, for all WR-6415 models and WR-151S-FX, black
15AVLow-mid frequency 15″ speaker, 3″ VCD, ferrite magnet, 400 W AES, 8 ohm
BC-64AL60 x 40 horn, aluminium, 1.5″ throat
F-WR6412-5Passive crossover for WR-6142/WR-6415 models
GM-15PRecone kit for 15P speaker
GM-M75NDiaphragm for M-75N/M-75/M-80 compression driver
M-75Compression driver, 3″ VCD, ferrite magnet, 1.5″ throat, 100 W AES, 8 ohm