PRODUCTS / ALTEA 700 SERIES

ALTEA-712A

2-way Powered Point Source

P/N. 10404880

Model
P/N

Features

Multi-purpose system with monitor position
Ultra lightweight Class D amplifier with SMPS
Stereo music streaming in high definition
User definable 24-bit DSP with LCD screen
5 voicing presets
User-defineable memories
Stackable 3-band EQ
Standby Mode
Rigging points

Applications

Concerts and corporate A/V
Portable and live clubs
Theaters and auditoriums
Houses of worship

DAScontrolDASlinkDASlink GM

ALTEA-712A

State-of-the-art Class D power amplification with DAScontrolTM user interface, DASlinkTM for remote control and music streaming, and DASlink Group ManagerTM, for controlling groups of systems.

The ALTEA-712A is a high-powered model from DAS Audio’s ALTEA Series. It is equipped with a 1500 Wpeak Class D two-channel amplifier that provides extended bandwidth, wide dynamic range and exceptionally low distortion. Digital Finite Impulse Response (FIR) filters are used in the signal processing of the ALTEA 712A system.

The DAScontrol™ interface allows users to configure voicing presets, input/output levels, EQ modes, delay and source mixing by way of a high-end 24-bit quality DSP and LCD screen on the rear of the cabinet. The remote control and monitoring APP DASlink™ of the ALTEA-700 series powered systems allows users to wirelessly stream music from mobile devices in high-definition stereo.

The high-performance transducers include the DAS 12F4 loudspeaker, which provides accurate low frequency reproduction with a deep, powerful bass. High frequencies are handled by the brilliant M-28 FEM optimized compression driver with 1″ exit providing exceptional performance and smooth reproduction.

The ALTEA-712 passive systems allow users to choose the powering option they prefer. Designed for use with external amplification and outboard DSP, they benefit from the enclosure features and high-power transducer components of the ALTEA 700 powered versions.

Performance
Frequency Range (-10 dB)60 Hz – 20 kHz
Horizontal Coverage (-6 dB)90º
Vertical Coverage60º
Maximum Peak SPL at 1 m130 dB
Electronics and Connectors
Nominal Amplifier Power (continuous)750 W
Nominal Amplifier Power (peak)1500 W
Input TypeBalanced
Input Impeadance20 kohms
Input Sensitivity1.95 V (+8 dBu)
Audio Signal Input Connector2 x Female XLR
Audio Signal Loop Thru Connector1 x Male XLR
ControlDASlink™
DAScontrol™
AC Input ConnectorIEC
Operating Range90-250 VAC
Current Draw 115 V3.0 A
Current Draw 230 V1.5 A
Enclosure
Enclosure ConstructionPolypropylene
Enclosure GeometryTrapezoidal
RiggingM8 Rigging Points
FinishTextured
ColorBlack
Dimensions ( H x W x D )655 x 380 x 350 mm
25,8 x 15,0 x 13,8 in
Net Weight17,5 kg ( 38,6 lb )
Components
LF Driver12F4
HF DriverM-28
Shipping
Carton Dimensions ( H x W x D )740 x 450 x 415 mm
29,1 x 17,7 x 16,3 in
Shipping Weight20,5 kg ( 45,2 lb )
Title Format Size
Data Sheet
HT_ALTEA712A_00.pdf PDF 323 Kb
User Manual
UM_AL1_01_EN.pdf PDF 5.72 Mb
Software
SW_DASlink.zip ZIP 24.89 Mb
SW_DASlinkGM.zip ZIP 6.7 Mb
Line Drawing
LD_2D_AL712A.dwg DWG 2.48 Mb
LD_2D_AL712A.png PNG 115 Kb
LD_2D_AL712A.svg SVG 661 Kb

WHAT IS BEHIND ALTEA?

The new Altea powered systems give you more control over your sound than ever before. Thanks to the DAScontrolTM interface, tailoring the configuration of the Altea systems to provide the best sound possible is easy.

ANL-1Set of 4 M8x13 forged steel eyebolts+4 carabiners, for flying
AX-112-5Wall mount bracket for DR-512/DR-512A/DR-515/DR-515A, WLL=25kgf, black
FUN-AL712Protective transport cover for 1 u. ALTEA-712/ALTEA-712A/ALTEA-412/ALTEA-412A, black
TRD-2Aluminum speaker stand for all models with 35mm pole mount socket, black
TRD-6Ring lock pole mount for use between satellite and sub system, black
12F4Low-mid frequency 12″ speaker, 3″ VCD, ferrite magnet, 500 W AES, 4 ohm
DSP-ALTEA-712ASpare DSP for ALTEA-712A
GM-12F4Recone kit for 12F4 speaker
M-28Compression driver, 1″ VCD, ferrite magnet, 1″ throat, 40 W AES, 8 ohm
MP-ALTEA-712AComplete power module for ALTEA-712A
T-PRO2Class D switching power supply Pascal amplifier, 2×500 W @ 4 ohm + 1×150 W @ 8 ohm