PRODUCTS / WR SERIES

WR-218S-DX

Passive Subwoofer

P/N. 10428249

Model
P/N

Features

Weather resistant subwoofer system
Fiberglass exterior finish
4000 Wprogram power handling
2 x 18LX low frequency loudspeakers
For use in biamplified systems
Stainless steel rigging hardware

Applications

Professional installation systems
Houses of worship
Auditoriums/Theaters
Theme parks
Outdoor Applications

WR Series

The WR series products offer flexible system configuration as well as special treatment for weather resistance and extended durability in extreme environments.

The WR-218S-DX is an externally powered, high-performance subwoofer system designed to provide outstanding performance in terms of output power, bandwidth extension and distortion. The WR-218S-DX incorporates two 18LX long excursion cone transducer.

Designed for the outdoor installation market, the WR-218S models are available in two finishes. The CX (covered exposure) finish for applications where cabinets are covered or protected, and DX (direct exposure) finish where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex polyurea coating. The DX versions augment the protection rating by employing a fiberglass exterior. Stainless steel fittings and mounting hardware are offered on both versions.
Performance
Frequency Range (-10 dB)29 Hz – 160 Hz
Nominal Impedance4 ohms
RMS Power Handling2000 W
Peak Power Handling8000 W
On-axis Sensitivity 1W/1 m99 dB SPL
Maximum Peak SPL at 1 m139 dB
Recommended AmplifierDX-100-230
DX-100-115
Recommended ProcessorDSP-2060A
Connectors
Audio Input ConnectorCovered Barrier Strip Terminals
Audio Output ConnectorCovered Barrier Strip Terminals
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryRectangular
RiggingM10 Rigging Points
FinishFiberglass
ColorBlack
IP RatingIP54
Dimensions ( H x W x D )550 x 1.065 x 675 mm
21,7 x 41,9 x 26,6 in
Net Weight76,0 kg ( 167,2 lb )
Components
LF Driver18LX
Shipping
Carton Dimensions ( H x W x D )595 x 1.145 x 722 mm
23,4 x 45,0 x 28,4 in
Shipping Weight80,0 kg ( 176,0 lb )
TitleFormatSize
Data Sheet
HT_WR218SDX_00.pdfPDF305 Kb
Catalogs
CAT_DAS_2019_FULL_LINE_01.pdfPDF26.9 Mb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
18LXSub-low frequency 18″ speaker, 4″ VCD, ferrite magnet, 1000 W AES, 8 ohm
GM-18LXRecone kit for 18LX speaker