PRODUCTS / HQ SERIES

HQ-112.43-CX

2-way Passive Point Source

P/N. 10432080

Model
P/N

Features

Two-way long-throw system
Horn loaded 12″ low frequency loudspeaker
CX finish (ISO-flex) for covered exposure
M-78N neodymium compression driver
Selectable passive/biamplified operating modes
Tight 40º x 30º coverage angles
Rotatable horns
Stainless steel rigging kit

Applications

Professional installation systems
Arenas and large sports facilities
Stadiums
Outdoor applications

HQ-112.43-CX

Long throw horns designed by DAS engineers and manufactured in fiberglass. The tight 40º x 30º coverage offers precise control of the dispersion. The horns can be rotated allowing the enclosure to be used in either the vertical or horizontal position.

The HQ-112.43 is offered in two exposure ratings-“covered exposure” (CX) for applications where cabinets are covered or protected, and “direct exposure” (DX) where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex coating on both the exterior and interior surfaces. The DX versions augment the protection rating by employing a fiberglass exterior and a gel coat sealed interior. Both versions are rated IP54.
Performance
Frequency Range (-10 dB)80 Hz – 18 kHz
Horizontal Coverage (-6 dB)40º
Vertical Coverage30º
Nominal ImpedancePassive: 8 ohms
Nominal Impedance MF8 ohms
Nominal Impedance HF8 ohms
RMS Power HandlingPassive: 400 W
RMS Power Handling HF150 W
RMS Power Handling MF400 W
Peak Power HandlingPassive: 1600 W
Peak Power Handling MF1600 W
Peak Power Handling HF400 W
On-axis Sensitivity 1W/1 mPassive: 111 dB SPL
On-axis Sensitivity 1W/1 m MF111 dB SPL
On-axis Sensitivity 1W/1 m HF112 dB SPL
Maximum Peak SPL at 1 mPassive: 143 dB
Maximum Peak SPL at 1 m MF143 dB
Maximum Peak SPL at 1 m HF140 dB
Recommended AmplifierDX-100I-230
DX-100I-115
DX-80I-230
DX-80I-115
Connectors
Audio Input Connector1 x speakON NL4
Barrier Strip
Audio Output Connector1 x speakON NL4
Barrier Strip
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingM10 Rigging Points
FinishFiberglass
ColorBlack
Dimensions ( H x W x D )990 x 685 x 755 mm
39,0 x 27,0 x 29,7 in
Net Weight56,0 kg ( 123,2 lb )
Components
LF Driver12HQN
HF DriverM-78N
Horn/WaveguideBCH-4030-7037
BCM-4030-7037
Shipping
Carton Dimensions ( H x W x D )1.070 x 650 x 745 mm
42,1 x 25,6 x 29,3 in
Shipping Weight63,0 kg ( 138,9 lb )
Title Format Size
Data Sheet
HT_HQ11243_02.pdf PDF 618 Kb
User Manual
UM_HQ_02_EN.pdf PDF 5.44 Mb
Modeling Data
MD_HQ_EF3_GLL.zip ZIP 8.64 Mb
Software
SW_EASEFOCUS_3.1.1&GLL.zip ZIP 181.64 Mb
Line Drawing
LD_2D_HQ11243.dwg DWG 408 Kb
LD_2D_HQ112.43.svg SVG 99 Kb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
UFBUniversal Fly Bar, black
12HQNMid frequency 12″ speaker, 3″ VCD, ferrite magnet, 400 W AES, 8 ohm
BCH-4030-703740 x 30 horn, fiberglass, 1.5″ throat, RAL 7037 grey
BCM-4030-703740 x 30 horn, fiberglass, for 12″ speaker, RAL 7037 grey
F-HQ112.43Passive crossover for HQ-112.43
GM-12HQ
GM-M75NDiaphragm for M-75N/M-75/M-80 compression driver
M-78NCompression driver, 3″ VCD, neodymium magnet, 1.5″ throat, 100 W AES, 8 ohm