PRODUCTS / VANTEC SERIES

VANTEC-12

2-way Passive Point Source

P/N. 10431090

Model
P/N

Features

2-way, full range system 
12″ Fseries bass loudspeaker 
1” FEM optimized compression driver
Enclosure designAllows for stageMonitor use
Built-in rigging points 
DualAngle (0º/10º) Pole mount socket

Applications

Concerts and corporate A/V
Portable and live clubs
Concert halls, theaters and auditoriums
Houses of worship

The VANTEC-12 is a 2 way passive full range loudspeaker that utilizes a 12″ F series low frequency transducer and a 1″ FEM optimized compression driver.

The multi angle cabinet is constructed of Birch plywood protected by the DAS ISO-flex black paint finish. Two bar handles and a rugged steel grille are provided. A 35 mm tripod socket with dual angle (0º/10º) allows for stand mounting.

Performance
Frequency Range (-10 dB)65 Hz – 20 kHz
Horizontal Coverage (-6 dB)90º
Vertical Coverage50º
Nominal Impedance8 ohms
RMS Power Handling500 W
Peak Power Handling2000 W
On-axis Sensitivity 1W/1 m98 dB SPL
Maximum Peak SPL at 1 m135 dB
Recommended AmplifierPA-1500
Recommended ProcessorDSP-226
Connectors
Audio Input Connector1 x speakON NL4
Audio Output Connector1 x speakON NL4
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingM10 Rigging Points
FinishISO-flex Paint
ColorBlack
Depth380 mm (15,0 in)
Dimensions ( H x W x D )620 x 380 x 380 mm
24,4 x 15,0 x 15,0 in
Net Weight20,5 kg ( 45,2 lb )
Components
LF Driver12F
HF DriverM-28
Horn/WaveguideBC-95
Shipping
Carton Dimensions ( H x W x D )720 x 456 x 456 mm
28,4 x 18,0 x 18,0 in
Shipping Weight22,5 kg ( 49,6 lb )
TitleFormatSize
Data Sheet
HT_VANTEC12_00.pdfPDF321 Kb
User Manual
UM_VT1_01_EN.pdfPDF3.25 Mb
Line Drawing
LD_2D_VT12.svgSVG216 Kb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
AXU-ACT512“U” Bracket wall/ceiling/truss/tripod for ACTION-512/ACTION-512A, VANTEC-12/VANTEC-12A, black
FUN-VT12Protective transport cover for 1 u. ACTION-512/ACTION-512A, VANTEC-12/VANTEC-12A, black
SPK4-11m speaker cable, 4x(2.5mm2), 2x NL4
SPK4-1010m speaker cable, 4x(2.5mm2), 2x NL4
SPK4-2020m speaker cable, 4x(2.5mm2), 2x NL4
TRD-2Aluminum speaker stand for all models with 35mm pole mount socket, black
TRD-6Ring lock pole mount 35 mm x 750 mm for use between satellite and sub system, black
TRD-735 mm ring lock adjustable height (1005 mm – 1485 mm) pole mount for use between satellite and sub systems, black
12FLow-mid frequency 12″ speaker, 3″ VCD, ferrite magnet, 500 W AES, 8 ohm
BC-9590 x 50 horn, polyamide with fiber, 1″ throat
F-VT12Passive crossover for VANTEC-12
GM-12FRecone kit for 12F speaker
LAMP-F-2121 W lamp for passive crossover
M-28Compression driver, 1″ VCD, ferrite magnet, 1″ throat, 40 W AES, 8 ohm