PRODUCTS / WR SERIES

WR-8826-CX

2-way Passive Point Source

P/N. 10428010

Model
P/N

Features

EN54-24 certified for use in voice alarm systems
Weather resistant, environmental performance IP56
Twin 6″ loudspeaker
1″ annular diaphragm compression driver
Threaded fixing points for wall mounts
Rating CX (covered exposure)
Rating DX (direct exposure)

Applications

Professional installation systems
Houses of worship
Auditoriums/Theaters
Theme parks
Outdoor Applications

WR Series

The DAS EN54-24 certified speakers are ideal for use in life safety applications or anywhere clear, powerful high-quality audio is needed. Thanks to their robustness and certified performance under climatic and mechanical conditions, the EN54-24 models are suitable for use in voice evacuation systems, both indoors or extreme outdoor environments.

The WR-8826-CX employs twin 6B woofers for low frequency reproduction. A 1” annular diaphragm compression driver provides brilliant highs. The birch plywood cabinet construction offers an ultra-compact design which is available in black, white or military grey depending on the finish.

The WR-8826-CX offers two exposure ratings: CX (covered exposure) for applications where cabinets are covered or protected, and DX (direct exposure) where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex polyurea coating. The DX versions augment the protection rating by employing a fiberglass exterior. Stainless steel fittings and mounting hardware are offered on both versions.
Performance
Frequency Range (-10 dB)70 Hz – 20 kHz
Horizontal Coverage (-6 dB)80º
Vertical Coverage80º
Nominal Impedance8 ohms
RMS Power Handling200 W
Peak Power Handling800 W
On-axis Sensitivity 1W/1 m93 dB SPL
Maximum Peak SPL at 1 m122 dB
Recommended AmplifierDX-80-230
DX-80-115
Recommended ProcessorDSP-2040
Connectors
Audio Input ConnectorBarrier Strip
Audio Output ConnectorBarrier Strip
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingM10 Rigging Points
FinishISO-flex Paint
ColorBlack
IP RatingIP-56
Dimensions ( H x W x D )550 x 230 x 270 mm
21,7 x 9,1 x 10,6 in
Net Weight12,0 kg ( 26,5 lb )
Components
LF Driver6B
HF DriverM-1
Horn/WaveguideBC-88
Shipping
Carton Dimensions ( H x W x D )608 x 274 x 345 mm
23,9 x 10,8 x 13,6 in
Shipping Weight13,0 kg ( 28,7 lb )
TitleFormatSize
Data Sheet
HT_WR8826_01.pdfPDF503 Kb
User Manual
UM_WR1_01_EN.pdfPDF5.54 Mb
Modeling Data
MD_WR_EF3_GLL.zipZIP247 Kb
Line Drawing
LD_2D_WR8826.dwgDWG351 Kb
LD_2D_WR8826.svgSVG66 Kb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
AX-SPG128 mm TV clamp spigot adapter with M10 thread for AXU/AXF brackets
AXC-ATC-clamp for using mounts with lighting truss
AXU-WR8826“U” bracket, wall/ceiling/truss, for all WR-8826 models, black
AXW-1Wall mount bracket and safety cable for various models, WLL=12kgf, black
6BLow-mid frequency 6″ speaker, 1.5″ VCD, ferrite magnet, 100 W AES, 8 ohm
BC-8880 x 80 horn, polyamide with fiber, 1″ throat
F-WR8826Passive crossover for WR-8826 models
M-1Compression driver, 1″ VCD, ferrite magnet, 1″ throat, 40 W AES, 8 ohm