EN54 SERIES Complete series

WR-8826-TDXW

P/N. 10428121

Model

Color

Features

Passive, 200 W, 2x 6″, 2 way full-range, 80×80 horn, DX, IP56, 70 V/100 V line transformer, white

SPL Max: 122 dB
Dispersion: 80º x 80º
Weight: 11,0 kg ( 24,5 lb )

Download data sheet

Add to compare Where to buy

description

The WR-8826 is a passive two-way system with an IP56 rating, designed for permanent professional outdoor installations. It incorporates two 6B loudspeakers for low-frequency reproduction and a compression driver with a 1″ annular diaphragm that delivers clear and defined high-frequency reproduction. Its ultra-compact enclosure, made from birch plywood, minimizes unwanted vibrations and helps reduce distortion, maintaining stable acoustic performance in demanding conditions. This model is available in black or white finishes to facilitate integration into different environments.

The WR series is designed to provide high resistance and durability in permanent outdoor installations. All metal components of the system are made from stainless steel to ensure high corrosion resistance. The connectors feature protection against liquids and dust through hermetic sealing. The grilles incorporate a three-layer textile barrier composed of acoustic fabric, filtering foam and a hydrophobic mesh that blocks dust, dirt and moisture without affecting acoustic performance. In addition, the enclosure features a fully sealed design that prevents water ingress and protects internal components in outdoor installations, ensuring reliable operation even under demanding environmental conditions. The WR series is available in CX (Covered Exposure) versions for partially covered installations and DX (Direct Exposure) versions designed for locations fully exposed to the elements.

All systems in the WR series share these protection specifications. This model corresponds to the DX version, designed for installations fully exposed to the elements and equipped with a reinforced fiberglass exterior.

This model incorporates a 100 / 70 V multi-tap transformer, allowing integration into loudspeaker line audio distribution systems.

technical data

Performance
Frequency Range (-10 dB)	76 Hz – 20 kHz
Horizontal Coverage (-6 dB)	80º
Vertical Coverage	80º
Nominal Impedance	133 ohms
Transformer Taps 70 V	37 W
Transformer Taps 100 V	75 W
RMS Power Handling	75 W
Peak Power Handling	300 W
On-axis Sensitivity 1W/1 m	93 dB SPL
Maximum Peak SPL at 1 m	118 dB
Recommended Amplifier	INTEGRAL-A402 INTEGRAL-A404 INTEGRAL-A1002 INTEGRAL-A1004 INTEGRAL-A1602 INTEGRAL-A1604 INTEGRAL-MA1004 INTEGRAL-MA1604
Recommended Processor	INTEGRAL-M88 INTEGRAL-MA1604 INTEGRAL-MA1004

Connectors
Audio Input Connector	Covered Barrier Strip Terminals
Audio Output Connector	Covered Barrier Strip Terminals
Enclosure
Enclosure Construction	Birch Plywood
Enclosure Geometry	Trapezoidal
Rigging	M10 Rigging Points
Finish	Fiberglass
Color	Black
IP Rating	IP56
Dimensions ( H x W x D )	550 x 230 x 270 mm 21,7 x 9,1 x 10,6 in
Net Weight	11,0 kg ( 24,5 lb )
Components
LF Driver	6B
HF Driver	M-1
Horn/Waveguide	BC-88
Shipping
Carton Dimensions ( H x W x D )	608 x 274 x 345 mm 23,9 x 10,8 x 13,6 in
Shipping Weight	15,0 kg ( 33,0 lb )