PRODUCTS / ARTEC 500 SERIES

ARTEC-526A-115

2-way Powered Point Source

P/N. 10423380

Model
P/N

Features

Ultra lightweight Class D amplifier
Switch-mode power supply
Reduced size and weight
Horizontal or vertical position
Pole mount accessories

Applications

A/V systems and corporate events
Meeting rooms, classrooms, and exhibit areas
Installations in bars and clubs

ARTEC-500 Series

The ARTEC-500 Series full range systems have been designed to provide wide bandwidth and high SPL in a visually discrete package. The ARTEC-500 products can be installed on walls, ceilings or columns thanks to an extensive selection of optional mounting accessories. They are the ideal choice for under balcony, area fill and near field applications in hotels, restaurants, and karaoke clubs.

The ARTEC-526A incorporates twin 6” loudspeakers for low frequency reproduction. The 720 W peak power of the Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion-features hard to find on other systems in this market segment. The DAS 6P loudspeakers provide accurate low frequency reproduction. High frequencies are handled by the M-34 compression driver with 1″ exit offering excellent HF performance. The birch plywood cabinet construction offers an ultra-compact design which is available in black or white.

Performance
Frequency Range (-10 dB)60 Hz – 20 kHz
Horizontal Coverage (-6 dB)80º
Vertical Coverage80º
Maximum Peak SPL at 1 m125 dB
Electronics and Connectors
Nominal Amplifier Power LF (continuous)360 W
Nominal Amplifier Power LF (peak)720 W
Nominal Amplifier Power HF (continuous)180 W
Nominal Amplifier Power HF (peak)360 W
Input TypeBalanced
Input Impeadance20 kohms
Input Sensitivity1.95 V (+8 dBu)
Audio Signal Input Connector1 x Female XLR
Audio Signal Loop Thru Connector1 x Male XLR
AC Input ConnectorpowerCon NAC3FCA
Operating Range90-127 VAC
Current Draw 115 V2.4 A
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingM10 Rigging Points
FinishISO-flex Paint
ColorBlack
Dimensions ( H x W x D )550 x 195 x 260 mm
21,7 x 7,7 x 10,2 in
Net Weight11,0 kg ( 24,3 lb )
Components
LF Driver6P4
HF DriverM-34
Horn/WaveguideBC-88
Shipping
Carton Dimensions ( H x W x D )638 x 266 x 330 mm
25,1 x 10,5 x 13,0 in
Shipping Weight16,1 kg ( 35,5 lb )
TitleFormatSize
Data Sheet
HT_AR526A_01.pdfPDF2.11 Mb
User Manual
UM_AR51_01_EN.pdfPDF2.43 Mb
Modeling Data
MD_ARTEC500A_EF3_GLL.zipZIP403 Kb
Software
SW_EASEFOCUS_3.1.7&GLL.zipZIP200.78 Mb
Line Drawing
LD_2D_AR526.dwgDWG279 Kb
LD_2D_AR526A.svgSVG148 Kb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
AX-SPG128 mm TV clamp spigot adapter with M10 thread for AXU/AXF brackets
AX-SPG228 mm TV clamp spigot adapter with groove and pin for AXR-AR5 mount
AXC-ATC-clamp for using mounts with lighting truss
AXC-ZTSpeaker adaptor (required for TRD-2/TRD-6), black
AXR-AR5Adjustable flying mount for artec 500 series/SF-10/SF-26, black
AXU-AR526“U” bracket, wall/ceiling/truss/TRD-2/TRD-6, for ARTEC-526/ARTEC-526A/SF-26, black
AXW-1Wall mount bracket and safety cable for various models, WLL=12kgf, black
TRD-2Aluminum speaker stand for all models with 35mm pole mount socket, black
TRD-6Ring lock pole mount for use between satellite and sub system, black
6P4Low-mid frequency 6″ speaker, 2″ VCD, ferrite magnet, 200 W AES, 4 ohm
BC-8880 x 80 horn, polyamide with fiber, 1″ throat
DSP-ARTEC-526ASpare DSP for ARTEC-526A
M-34Compression driver, 1.4″ VCD, ferrite magnet, 1″ throat, 50 W AES, 8 ohm
MP-ARTEC-526A- 230Complete power module for ARTEC-526A-230
SMPS400A180switching power supply, Hypex, 1 x 400 W