PRODUCTS / VANTEC SERIES

VANTEC-118A-W

Powered Subwoofer

P/N. 10431141

Model
P/N

Features

Active front-loaded subwoofer system
1 x 18″ DAS 18FW loudspeaker
Class D amplifier 2000 Wpeak
Digital signal processing (DSP)
Unique “Deep-Loud” bass EQ switch
Variable low-pass filter 80 Hz-125 Hz
LED ON/OFF switch on backplate
Rigging compatible with VANTEC-20A
Top located pole mount socket

Applications

Concerts and corporate A/V
Portable and live clubs
Concert halls, theaters and auditoriums
Houses of worship

DAScontrol
The VANTEC-118A-W is an active front loaded bass system which has been designed specifically for use with the VANTEC-20A-W curved source line array. Compact in size, the unit can be flown in arrays or linked together in ground stacks thanks to the DAS Click-Lock™ rigging system which is compatible with the VANTEC-20A-W.

The electronics package includes a 2000 Wpeak Class D amplifier and 24-bit high-end DSP for exceptional audio reproduction. A unique “Deep-Loud” EQ switch allows users to tailor the bass output to provide a low subwoofer type response using the “Deep” setting or a louder hard hitting performance in the “Loud” setting. On the rear panel, controls can be found for gain, polarity and a continually variable low-pass filter which ranges from 80 Hz to 125 Hz. The VANTEC-118A-W is phase response coherent with the other Vantec Series active tops such as the VANTEC-20A-W offering precise alignment without the need of an external DSP.
Performance
Frequency Range (-10 dB)35 Hz – 125 Hz
Maximum Peak SPL at 1 m134 dB
Electronics and Connectors
Nominal Amplifier Power (continuous)1000 W
Nominal Amplifier Power (peak)2000 W
Input TypeBalanced
Input Impeadance20 kohms
Input Sensitivity3 V (+12 dBu)
Audio Signal Input Connector2 x Female XLR
Audio Signal Loop Thru Connector2 x Male XLR
AC Input ConnectorpowerCon NAC3FCA
AC Output ConnectorpowerCON NAC3FCB
Operating Range90-127/180-250 VAC
Current Draw 115 V4.4 A
Current Draw 230 V2.2 A
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryRectangular
RiggingM10 Rigging Points
FinishISO-flex Paint
ColorWhite
Dimensions ( H x W x D )490 x 615 x 785 mm
19,3 x 24,2 x 30,9 in
Net Weight45,2 kg ( 99,4 lb )
Components
LF Driver18FW
Shipping
Carton Dimensions ( H x W x D )730 x 660 x 880 mm
28,7 x 26,0 x 34,7 in
Shipping Weight48,0 kg ( 105,6 lb )
TitleFormatSize
Data Sheet
HT_VT118A_05.pdfPDF1.06 Mb
User Manual
UM_VT3_02_EN.pdfPDF5.39 Mb
Line Drawing
LD_2D_VT118A.svgSVG337 Kb
Catalogs
CAT_DAS_2019_FULL_LINE_01.pdfPDF26.9 Mb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
AX-VT20-WRigging bumper for VANTEC-20A (max 5 u.), white
FUN-2-VT118Protective transport cover for 2 u. VANTEC-118A, black
PL-VT118SWooden transport dolly for VANTEC-118A (max 2 u.), black
TRD-6Ring lock pole mount 35 mm x 750 mm for use between satellite and sub system, black
TRD-735 mm ring lock adjustable height (1005 mm – 1485 mm) pole mount for use between satellite and sub systems, black
18FWSub-low frequency 18″ speaker, 3″ VCD, ferrite magnet, 600 W AES, 8 ohm
DSP-VANTEC-118ADSP-Board für VANTEC-118A
GM-18FWRecone kit for 18FW speaker
MP-VT118AComplete power module for VANTEC-118A
S-PRO2Class D switching power supply Pascal amplifier, 2×500 W @ 4 ohm