PRODUCTS / EVENT SERIES

EVENT-M210A-115

3-way powered Stage Monitor

P/N. 10429220

Model
P/N

Features

Light-weight Class D amplifier topology
High-end DSP chipsets
Special monitor Easy-DSP™ Interface
Quality Neutrik® connectors
Top grade Birch cabinet construction
Durable ISO-flex finish
Proprietary injected aluminum HF waveguide
DAS M-60 compression driver

Applications

House of worship
Theatres, auditoria and performing arts centers
Live music clubs
Corporate A/V
Live sound touring/Rental services

The EVENT-M210A is a three-way stage monitor in a double 10” “dual-band” configuration providing a wide frequency range. The DAS loudspeaker units have been teamed up with a single M-60 compression driver and purpose-designed injected aluminum high frequency waveguide.

The EVENT-M210A wedge is powered by a three channel Class D amplifier which provides 360 Wpeak per channel. The amp´s rear panel includes quality Neutrik® XLR and powerCON connectors, status LEDS to facilitate setup.

Performance
Frequency Range (-10 dB)70 Hz – 20 kHz
Horizontal Coverage (-6 dB)60º
Vertical Coverage20ºUp/30ºDown
Maximum Peak SPL at 1 m132 dB
Electronics and Connectors
Nominal Amplifier Power LF (continuous)180 W
Nominal Amplifier Power LF (peak)360 W
Nominal Amplifier Power MF (continuous)180 W
Nominal Amplifier Power MF (peak)360 W
Nominal Amplifier Power HF (continuous)180 W
Nominal Amplifier Power HF (peak)360 W
Input TypeBalanced
Input Impeadance20 kohms
Input Sensitivity6.2 V (+18 dBu)
Audio Signal Input Connector1 x Female XLR
Audio Signal Loop Thru Connector1 x Male XLR
AC Input ConnectorpowerCon NAC3FCA
AC Output ConnectorpowerCON NAC3FCB
Operating Range90-127 VAC
Current Draw 115 V3.0 A
Certification NumberNRTL US&CA SGSNA/19/SUW/00109
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingCaptive Rigging System
FinishISO-flex Paint
ColorBlack
Dimensions ( H x W x D )340 x 650 x 460 mm
13,4 x 25,6 x 18,1 in
Net Weight23,5 kg ( 51,8 lb )
Components
LF Driver10MI4
MF Driver10MI4
HF DriverM-75
Horn/WaveguideBC-632
Shipping
Carton Dimensions ( H x W x D )740 x 370 x 490 mm
29,1 x 14,6 x 19,3 in
Shipping Weight26,0 kg ( 57,3 lb )
TitleFormatSize
Data Sheet
HT_EVM210A_00.pdfPDF190 Kb
User Manual
UM_EV1_01_EN.pdfPDF9.95 Mb
Rigging Manual
RM_EV1_01_EN.pdfPDF23.02 Mb
Line Drawing
LD_2D_EVENTM210A.dwgDWG715 Kb
LD_2D_EVM210A.svgSVG219 Kb
Catalogs
CAT_EVENT_01.pdfPDF2.84 Mb
CAT_DAS_2019_FULL_LINE_01.pdfPDF26.9 Mb

GET TO KNOW EVENT!

The new Event Line Arrays put the world acclaimed D.A.S. performance at your reach like never before. For portable live sound applications, or fixed installations in almost any type of venue, the Event Line Arrays have been designed to provide exceptional sound, steadfast reliability and value beyond comparison.

PWCONLINK-090.9m powerCON NAC3FCA+NAC3FCB DASnet cable
SC-11m XLR microphone signal balanced cable
SC-1010m XLR microphone signal balanced cable
10MI4Low-mid frequency 10″ speaker, 2.5″ VCD, ferrite magnet, 250 W AES, 4 ohm
BC-63260 x 50 horn, aluminium, 1″ throat
DSP-EVENT-M210ASpare DSP for EVENT-M210A
GM-10MI4Recone kit for 10MI4 speaker
GM-M60NDiaphragm for M-60N/M-60 compression driver
M-75Compression driver, 3″ VCD, ferrite magnet, 1.5″ throat, 100 W AES, 8 ohm
MP-EVENT-M210A-115Complete power module for EVENT-M210A-115
SMPS400A180switching power supply, Hypex, 1 x 400 W