PRODUCTS / WR SERIES

WR-6412-CX

2-way Passive Point Source

P/N. 10428050

Model
P/N

Features

EN54-24 certified for use in voice alarm systems
2-way system for outdoor installation
CX finish (ISO-flex) for covered exposure
IP54 ingress protection rating
1 x 12AV loudspeaker
M-75 compression driver with 3″ diaphragm
Rotatable 60º x 40º horn design
Stainless steel fixing points

Applications

Professional installation systems
Houses of worship
Auditoriums/Theaters
Theme parks
Outdoor Applications

WR Series

The DAS EN54-24 certified speakers are ideal for use in life safety applications or anywhere clear, powerful high-quality audio is needed. Thanks to their robustness and certified performance under climatic and mechanical conditions, the EN54-24 models are suitable for use in voice evacuation systems, both indoors or extreme outdoor environments.

The WR-6412-CX employs a 12AV woofer for low frequency reproduction. A M-75 compression driver with 3″ titanium diaphragm attached to a 60º x 40º rotatable horn provides exceptional high frequency reproduction. The rugged birch plywood cabinet construction is available in black, white or military grey depending on the finish.

The WR-6412-CX offers two exposure ratings: CX (covered exposure) for applications where cabinets are covered or protected, and DX (direct exposure) where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex polyurea coating on the exterior surface. The DX versions augment the protection rating by employing a fiberglass exterior. Stainless steel fittings and mounting hardware are offered on both versions.
Performance
Frequency Range (-10 dB)60 Hz – 20 kHz
Horizontal Coverage (-6 dB)60º
Vertical Coverage40º
Nominal Impedance8 ohms
RMS Power Handling400 W
Peak Power Handling1600 W
On-axis Sensitivity 1W/1 m98 dB SPL
Maximum Peak SPL at 1 m130 dB
Recommended AmplifierDX-80-230
DX-80-115
Recommended ProcessorDSP-2040
Connectors
Audio Input ConnectorBarrier Strip
Audio Output ConnectorBarrier Strip
Enclosure
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingM10 Rigging Points
FinishISO-flex Paint
ColorBlack
IP RatingIP-56
Dimensions ( H x W x D )705 x 395 x 395 mm
27,8 x 15,6 x 15,6 in
Net Weight24,0 kg ( 52,8 lb )
Components
LF Driver12P
HF DriverM-75
Horn/WaveguideBC-64AL
Shipping
Carton Dimensions ( H x W x D )773 x 458 x 472 mm
30,4 x 18,0 x 18,6 in
Shipping Weight31,0 kg ( 68,3 lb )
TitleFormatSize
Data Sheet
HT_WR6412_01.pdfPDF540 Kb
User Manual
UM_WR1_01_EN.pdfPDF5.54 Mb
Modeling Data
MD_WR_EF3_GLL.zipZIP247 Kb
Line Drawing
LD_2D_WR6412.dwgDWG256 Kb
LD_2D_WR6412.svgSVG30 Kb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
AX-SPG128 mm TV clamp spigot adapter with M10 thread for AXU/AXF brackets
AXC-ATC-clamp for using mounts with lighting truss
AXU-WR6412“U” bracket, wall/ceiling/truss, for all WR-6412 models and WR-121S-FX, black
12PLow-mid frequency 12″ speaker, 3″ VCD, ferrite magnet, 400 W AES, 8 ohm
BC-64AL60 x 40 horn, aluminium, 1.5″ throat
F-WR6412-5Passive crossover for WR-6142/WR-6415 models
GM-12PRecone kit for 12P speaker
GM-M75NDiaphragm for M-75N/M-75/M-80 compression driver
M-75Compression driver, 3″ VCD, ferrite magnet, 1.5″ throat, 100 W AES, 8 ohm