2-way Passive Point Source

P/N. 10432010



Two-way long-throw system
DX finish (Fiberglass) for direct exposure
Horn loaded 12″ low frequency loudspeaker
M-78N neodymium compression driver
Selectable passive/biamplified operating modes
Tight 40º x 30º coverage angles
Rotatable horns
Stainless steel rigging kit


Professional installation systems
Arenas and large sports facilities
Outdoor applications


Long throw horns designed by DAS engineers and manufactured in fiberglass. The tight 40º x 30º coverage offers precise control of the dispersion. The horns can be rotated allowing the enclosure to be used in either the vertical or horizontal position.

The HQ-112.43 is offered in two exposure ratings-“covered exposure” (CX) for applications where cabinets are covered or protected, and “direct exposure” (DX) where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex coating on both the exterior and interior surfaces. The DX versions augment the protection rating by employing a fiberglass exterior and a gel coat sealed interior. Both versions are rated IP54.
Frequency Range (-10 dB)80 Hz – 18 kHz
Horizontal Coverage (-6 dB)40º
Vertical Coverage30º
Nominal ImpedancePassive: 8 ohms
Nominal Impedance MF8 ohms
Nominal Impedance HF8 ohms
RMS Power HandlingPassive: 400 W
RMS Power Handling HF150 W
RMS Power Handling MF400 W
Peak Power HandlingPassive: 1600 W
Peak Power Handling MF1600 W
Peak Power Handling HF400 W
On-axis Sensitivity 1W/1 mPassive: 111 dB SPL
On-axis Sensitivity 1W/1 m MF111 dB SPL
On-axis Sensitivity 1W/1 m HF112 dB SPL
Maximum Peak SPL at 1 mPassive: 143 dB
Maximum Peak SPL at 1 m MF143 dB
Maximum Peak SPL at 1 m HF140 dB
Recommended AmplifierDX-100I-230
Audio Input Connector1 x speakON NL4
Covered Barrier Strip Terminals
Audio Output Connector1 x speakON NL4
Covered Barrier Strip Terminals
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
RiggingM10 Rigging Points
Depth755 mm (29,7 in)
Dimensions ( H x W x D )990 x 685 x 755 mm
39,0 x 27,0 x 29,7 in
Net Weight58,0 kg ( 127,9 lb )
LF Driver12HQN
HF DriverM-78N
Carton Dimensions ( H x W x D )1.070 x 650 x 745 mm
42,1 x 25,6 x 29,3 in
Shipping Weight65,0 kg ( 143,3 lb )
Title Format Size
Data Sheet
HT_HQ11243_02.pdf PDF 618 Kb
User Manual
UM_HQ_02_EN.pdf PDF 5.44 Mb
Modeling Data ZIP 13.12 Mb
SW_EASEFOCUS_3.1.9& ZIP 241.96 Mb
Line Drawing
LD_2D_HQ11243.dwg DWG 408 Kb
LD_2D_HQ112.43.png PNG 68 Kb
LD_2D_HQ112.43.svg SVG 99 Kb
Architectural Specifications
AS_HQ112_43_02_EN.docx DOCX 13 Kb
ANL-2Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying
UFBUniversal Fly Bar, black, 16.5 kg (36.3 lb)
12HQNMid frequency 12″ speaker, 3″ VCD, ferrite magnet, 400 W AES, 8 ohm
BCH-4030-703740 x 30 horn, fiberglass, 1.5″ throat, RAL 7037 grey
BCM-4030-703740 x 30 horn, fiberglass, for 12″ speaker, RAL 7037 grey
F-HQ112.43Passive crossover for HQ-112.43
GM-M75NDiaphragm for M-75N/M-75/M-80 compression driver
M-78NCompression driver, 3″ VCD, neodymium magnet, 1.5″ throat, 100 W AES, 8 ohm