2-way Passive Line Array

P/N. 10420220



EN54-24 certified line array system
1x 12″ neodymium loudspeaker
M-75N Neodymium compression driver with1.5″ exit
SERPIS high frequency plane wave generator
Rigging system integrated in the cabinet design


Professional Installation Systems
Houses of Worship
Hotel Ballrooms and Meeting Rooms
Outdoor Applications

The AERO-12 is an EN54 24 certified compact line array system. This unique product allows the venue´s main PA or music system to double as the voice alarm system eliminating needless duplication while increasing cost effectiveness.

 The AERO-12 incorporates a DAS 12LN4C, 12″ low frequency transducer employing a 75 mm (3″) voice coil and neodymium magnet motor assembly. High frequency reproduction relies on the exceptional characteristics of the new DAS M 75N neodymium compression driver designed for use in applications where high SPL and low distortion are required. A titanium diaphragm featuring a 75 mm copper clad, aluminum flat wire voice coil yields high sensitivity, low distortion and extended frequency response.

The rugged enclosure is manufactured using birch plywood and finished with a durable ISO flex polyurea coating. The captive rigging system splay angles range from 0º to 10º and can be adjusted in 0.5º increments from 0º to 3º and 1º increments from 3º to 10 º allowing a wide range of column curvatures to be accomplished.
Frequency Range (-10 dB)62 Hz – 22 kHz
Horizontal Coverage (-6 dB)90º
Vertical CoverageSplay Dependent
Nominal Impedance8 ohms
RMS Power Handling250 W
Audio Input Connector1 x speakON NL4
Audio Output Connector1 x speakON NL4
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal
FinishISO-flex Paint
Dimensions ( H x W x D )320 x 690 x 390 mm
12,6 x 27,2 x 15,4 in
Net Weight27,0 kg ( 59,5 lb )
LF Driver12LNC
HF DriverM-75N
Carton Dimensions ( H x W x D )767 x 389 x 443 mm
30,2 x 15,3 x 17,4 in
Shipping Weight27,9 kg ( 61,5 lb )
Data Sheet
HT_AE12_01.pdfPDF1.86 Mb
User Manual
UM_AE12_03_EN.pdfPDF4.31 Mb
SW_EASEFOCUS_3.1.1&GLL.zipZIP181.64 Mb
Line Drawing
LD_2D_AERO12A.dwgDWG267 Kb
LD_2D_AE12.svgSVG201 Kb
AX-AE12S2Rigging bumper for AERO-12/AERO-12A (max 18 u.), black
AX-COMBO12Rigging adapter to combine AERO-12/AERO-12A with AERO-50/LX-218C-R/LX-218CA-R (max 8 u.), black
PL-12SSteel transport dolly for max 6 u. AERO-12/AERO-12A, black
12LNCLow-mid frequency 12″ speaker, 3″ VCD, neodymium magnet, 400 W AES, 8 ohm
BPS-9010Spare horn for AERO-12/AERO-12A
F-AE12Passive crossover for AERO-12
GM-12PRecone kit for 12P speaker
GM-M75NDiaphragm for M-75N/M-75/M-80 compression driver
M-75NCompression driver, 3″ VCD, neodymium magnet, 1.5″ throat, 100 W AES, 8 ohm
PIN-6Lock Pin Ø:6 mm L:23 mm, black