INTEGRAL-MA1502

New

P/N. 15005727

Model

Color

  • INTEGRAL-MA1502
    P.N. 15005727

Features

Audio matrix amplifier (2CH), 4IN x 2OUT (analog audio) + 4×4 DANTE I/O, 750 W, dual priority per output, ALMA™ control

  • Power per channel at 4 ohms: 750 W
  • Number of channels: 2
  • Digital Audio: DANTE / AES67

Add to compare Where to buy
Share

The INTEGRAL-MA1502 is a 2U rack-mount matrix amplifier designed for permanent installation applications. It delivers 2 x 750 W at 4 ohms and integrates a powerful DSP engine with 4 analog inputs, 2 amplified outputs, and 4×4 DANTE digital audio networking, enabling flexible and scalable system configurations.

Control, configuration, and monitoring are managed via ALMA™ software or ALMAweb over IP networks, as well as through third-party systems using OSC (Open Sound Control). DANTE audio channels can be processed internally and routed back into the network when required. The amplifier supports both low impedance and high impedance (70V/100V) systems, ensuring compatibility with a wide range of installation scenarios.

The unit incorporates a full matrix architecture with advanced routing and priority management capabilities, allowing it to operate as a central control element within the system. Internal memory supports more than 100 global presets and over 200 output channel presets, including optimized configurations for DAS AUDIO systems. Each output channel can be configured independently, enabling tailored system setups across different zones or speaker models.

Local operation is available via a 1.54” OLED display with rotary controls, providing intuitive access to essential parameters such as input and output levels, preset recall, mute, source selection, link management functions, and priority settings. Signal level monitoring is also available directly from the front panel.

For external integration, the INTEGRAL-MA1502 includes a GPIO (General Purpose Input/Output) interface with 3.3V logic level, ground connection, and eight configurable pins via ALMA™, facilitating control from external devices.

Two of the analog inputs can be configured as microphone inputs with 12V phantom power. The unit also integrates an Ethernet switch for daisy-chain network connections, eliminating the need for external switches. In addition, Wi-Fi and Bluetooth connectivity enable direct wireless operation via ALMAweb.

Output Power Ratings
Amplifier Channels2
Power 8 Ohms2 x 400 W
Power 8 Ohms Bridged1 x 1500 W
Power 4 Ohms2 x 750 W
Power 4 Ohms, Bridged1 x 1500 W
Power 2 Ohms2 x 750 W
Power 100 V1 x 1500 W
Power 70 V1 x 1200 W
Electronics and Audio
Amplifier Output CircuitryClass D
Frequency Response20 Hz-30 kHz (+0 – 0.5 dB)
Input Sensitivity+20 dBu
Max Input Level+22 dBu
Voltage gain17.5 dB
ControlsPower On/Off, Navigation knobs
DisplayOLED 1.54″
CoolingSide-Right-to-Left
Amplifier ProtectionsShort Circuit, DC Ouput, Temperature, Over/Under Voltage
LED IndicatorsOn, Comms, Signal, Protect
Sampling Rate48 kHz
Connectors
Analog Audio Input Connectors2 x 3.5 mm Pitch Terminal Block
DANTE Digital In/Out Connectors2 x RJ45 Fast Ethernet
Speaker Output ConnectorTerminal Block
Power
AC Input ConnectorIEC
Power SupplyUniversal Mains Switch Mode
Operating Range90-250 VAC
Current Draw 230 V / 115 V1.5 A / 3.0 A
DSP
Analog Input Channels4
Analog Output Channels2
DANTE Input Channels4
DANTE Output Channels4
AD Converters24 Bit @ 48 kHz 118 dBA Dynamic Range
DA Converters24 Bit @ 48 kHz 118 dBA Dynamic Range
Internal Precision32 Bit, 64 Bits Double Precission
Latency1 ms
Delay50ms per input / 120ms per output
EqualizerBell, Lo/Hi-Shelving, Hos
CrossoverLinkwitz-Riley, Butterworth, Bessel
High and Low Pass FiltersUp to 48 dB/oct
LimitersRMS, Peak
Load MonitoringYes
Dimensions-Weight
Dimensions ( H x W x D )88 x 483 x 208 mm
3,5 x 19,0 x 8,2 in
Net Weight4,1 kg ( 9,0 lb )
Shipping
Carton Dimensions ( H x W x D )170 x 525 x 315 mm
6,7 x 20,7 x 12,4 in
Shipping Weight4,9 kg ( 10,8 lb )
User Manual
User Manual
UM_INT_MA_EN.pdf
PDF · 5.37 Mb Download
User Manual
User Manual
Integral_series_Gain_Structure_and_Limiters_v2.pdf
PDF · 948 Kb Download
User Manual
User Manual
USER_INTEGRAL_OSC_Messages.A.2.pdf
PDF · 171 Kb Download
Software
Software
Integral_SpeakerOutputPresets_v1.zip
ZIP · 517 Kb Download
Software
Software
ALMA-3.0.1.exe
EXE · 145.8 Mb Download
Software
Software
ALMA-3.0.1.dmg
DMG · 248.99 Mb Download

Related products

References