INTEGRAL SERIES Complete series

INTEGRAL-M88

P/N. 10721170

Model

Color

INTEGRAL-M88
P.N. 10721170

Features

Audio Matrix, 4IN x 8OUT (analog audio) + 4×4 I/O DANTE channels, 48kHz sampling rate, two priority levels per Output, ALMA control

Download data sheet Where to buy

description

INTEGRAL-M88 is a half rack mount 1U size installation matrix with 4 analog input channels and eight analog output channels. Besides the analog audio inputs and outputs, a DANTE digital audio 4×4 chipset is included by default with the units. Control, configuration and management of the devices shall be done via ALMA software over IP or using Open Sound Control (OSC) protocol.

Priority capabilities, full matrix and routing options make this unit essential as the ”brain” of any type of installation. The internal memory resources allow to store more than 100 “global presets” and more than 200 “output channel presets” (speaker presets). A bank of output channel presets with specific processing parameters for all DAS Audio speakers is included allowing the users to configure each channel independently. For instance, it would be possible to recall for output 1 the preset of Q-23T, for output 2 the preset of Arco-4T, for output 3 the preset of Q-10 etc.

The unit includes an OLED display (1.54”) with control knobs for intuitive and easy navigation as well meters to monitor signal levels. Basic parameters can be accessible via front panel control knobs; input and output levels, global preset recall, output channel preset recall, mute, source selection, link manager functions, priority enabling etc.

Two of the analogue inputs can be switched to microphone with 12V Phantom power if needed.
The unit also Integrates an Ethernet Switch for daisy-chain connections. No external switch is needed.
WiFi and Bluetooth are available for direct wireless operation.

technical data

Electronics and Audio
Frequency Response	20 Hz-30 kHz (+0 -0.5 dB)
Max Input Level	+22 dBu
Max. Output Level	+22 dBu
Controls	Power On/Off, Navigation Buttons
Phantom Power	+ 12V DC
Sampling Rate	48 kHz
Display	OLED 1.54″
Cooling	Side-Right-to-Left
LED Indicators	On, Comms, Signal, Protect
Connectors
Analog Audio Input Connectors	2 x 3.5 mm Pitch Terminal Block
Analog Audio Output Connectors	4 x 3.5 mm Pitch Terminal Block
DANTE Digital In/Out Connectors	2 x RJ45 Fast Ethernet
Power
AC Input Connector	IEC 15A
Power Supply	Universal Mains Switch Mode
Operating Range	90 – 250 VAC
DSP
Analog Input Channels	4
Analog Output Channels	8
DANTE Input Channels	4
DANTE Output Channels	4
AD Converters	24 Bit @ 48 kHz 118 dBA Dynamic Range
DA Converters	24 Bit @ 48 kHz 118 dBA Dynamic Range
Internal Precision	32 Bit, 64 Bits Double Precission
Latency	1 ms
Delay	50ms per input / 135ms per output
Equalizer	Bell, Lo/Hi-Shelving, Hos
Crossover	Linkwitz-Riley, Butterworth, Bessel
High and Low Pass Filters	Up to 48 dB/oct
Limiters	RMS
Dimensions-Weight
Dimensions ( H x W x D )	44 x 215 x 210 mm 1,7 x 8,5 x 8,3 in
Net Weight	1,7 kg ( 3,7 lb )
Shipping
Carton Dimensions ( H x W x D )	440 x 400 x 60 mm 17,3 x 15,7 x 2,4 in
Shipping Weight	7,5 kg ( 16,5 lb )

downloads

Title	Format	Size
Data Sheet
HT_INTEGRALM88_00.pdf	PDF	513 Kb
User Manual
UM_INT_M88_EN.pdf	PDF	5.53 Mb
Integral_series_Gain_Structure_and_Limiters_v2.pdf	PDF	948 Kb
USER_INTEGRAL_OSC_Messages.A.2.pdf	PDF	171 Kb
Software
FactoryPresets_1.0.lib	LIB	122 Kb
ALMA.Setup.2.0.3.exe	EXE	128.97 Mb
ALMA-2.0.3.dmg	DMG	166.96 Mb
SW_EASE_Focus_v3.1.260.zip	ZIP	49.76 Mb
Line Drawing
CAD_2D_IG-M88.dwg	DWG	969 Kb