P/N. 10420160



3-way largeformat line array module
2 x 15″ neodymium loudspeakers
4 x 8″ neodymium loudspeakers
2 x neodymium compression driver with 1.5” exit
Integrated captive rigging system
Detachable front dolly panel


House of worship
Theatres, auditoria and performing arts centers
Live music clubs
Corporate A/V
Live sound touring/Rental services

The large format AERO-50 is the evolution of the highly successful AERO-48. This externally powered, high efficiency line array module integrates low, mid and high frequency transducers in a single unit. Designed for use in large scale events in stadiums and arenas, the AERO-50 offers a number of important improvements in terms of performance and weight reduction.

The low frequency reproduction is handled by two new 15GNR loudspeakers in a bass reflex configuration. The 15GNR speaker incorporates a 100 mm (4”) edge wound flat wire (EFW) voice coil and lightweight neodymium magnet assembly maximizing the dynamic response for a deep, precise bass. Four purpose built 8MN, 8” cone transducers incorporating neodymium magnetic assemblies and 62 mm (2.5”) voice coils are used for mid frequency reproduction.

High frequency reproduction is handled by two M-75N compression drivers designed for use in high level applications where abundant SPL and low distortion are mandatory. A pure titanium diaphragm featuring 75 mm (3”) copper clad aluminum EFW voice coil yields high sensitivity, low distortion and extended frequency response.

The rugged, trapezoidal enclosure is built using Birch plywood and covered with a durable paint finish. The captive rigging system splay angles range from 0º to 9.6º and can be adjusted in 0.8º increments from 0º to 3.2º and 1.6º increments from 3.2º to 9.6 º allowing a wide range of column curvatures to be accomplished.
Frequency Range (-10 dB)45 Hz – 20 kHz
Horizontal Coverage (-6 dB)90º
Vertical CoverageSplay Dependent
Nominal Impedance LF8+8 ohms
Nominal Impedance MF8 ohms
Nominal Impedance HF16 ohms
RMS Power Handling HF300 W
RMS Power Handling MF700 W
RMS Power Handling LF2 x 700 W
Peak Power Handling9600 W
Peak Power Handling LF2 x 2800 W
Peak Power Handling MF2800 W
Peak Power Handling HF1200 W
On-axis Sensitivity 1W/1 m LF99 dB SPL
On-axis Sensitivity 1W/1 m MF104 dB SPL
On-axis Sensitivity 1W/1 m HF112 dB SPL
Maximum Peak SPL at 1 m LF136 dB
Maximum Peak SPL at 1 m MF139 dB
Maximum Peak SPL at 1 m HF141 dB
Audio Input Connector1 x speakON NL8
Audio Output Connector1 x speakON NL8
Enclosure ConstructionBirch Plywood
FinishISO-flex Paint
Depth630 mm (24,8 in)
Dimensions ( H x W x D )480 x 1.355 x 630 mm
18,9 x 53,3 x 24,8 in
Net Weight85,0 kg ( 187,0 lb )
LF Driver15GNR
MF Driver8MN
HF DriverM-75N
Carton Dimensions ( H x W x D )540 x 1.500 x 810 mm
21,3 x 59,1 x 31,9 in
Shipping Weight107,0 kg ( 235,9 lb )
Title Format Size
Data Sheet
HT_AE50_00.pdf PDF 308 Kb
User Manual
UM_AE50_02_EN.pdf PDF 3.91 Mb
Configurations Guide ZIP 35.5 Mb
Modeling Data ZIP 40.03 Mb
SW_EASEFOCUS_3.1.9& ZIP 241.96 Mb
Line Drawing
CAD_2D_AERO50.dwg DWG 1006 Kb
LD_2D_AE50.png PNG 84 Kb
LD_2D_AE50.svg SVG 471 Kb
CAT_DAS_2020_FULL_LINE_7_2.pdf PDF 13.19 Mb
AX-AE50Rigging bumper for AERO-50 (max 20 u.), LX-218C-R/LX-218CA-R (max 16 u.), black, 51.0 kg (112.2 lb)
AX-COMBO12Rigging adapter to combine AERO-12/AERO-12A with AERO-50/LX-218C-R/LX-218CA-R (max 8 u.), black
FUN-AE50Protective transport cover for 1 u. AERO-50, black
PICKUP-AX-AE50Additional pick-up bar for two lifting points for AX-AE50, black, 28.5 kg (62.7 lb)
15GNRLow frequency 15″ speaker, 4″ VCD, neodymium magnet, 700 W AES, 8 ohm
8MNMid frequency 8″ speaker, 2.5″ VCD, neodymium magnet, 200 W AES, 8 ohm
BP-A4890 x 10 horn for Aero-48/50, polyurethane
F-AE50Passive crossover for AERO-50
GM-15GRecone kit for 15G speaker
GM-8MNRecone kit for 8MN speaker
GM-M75NDiaphragm for M-75N/M-75/M-80 compression driver
M-75NCompression driver, 3″ VCD, neodymium magnet, 1.5″ throat, 100 W AES, 8 ohm
PIN-8Lock Pin Ø:8 mm L:30 mm, black