P/N. 10420500



Self-powered cardioid Line array
8 channel amplifier, Class D, 6000Wrms
Controlled horizontal dispersion up to 100 Hz. 
Cardioid attenuation of -15dB (63 Hz – 200 Hz)
IP control and monitoring through ALMA™
FIR processing and digital management via DASaim™


Outdoor festivals and live concerts
Theatres, auditoria and performing arts centers
Large live music clubs
Live sound touring/Rental services

LARA® is a 4-way symmetrical, cardioid, self-amplified line array system with 6000Wrms power. LARA® has a linear dB performance of 146 dB SPL MAX and a wide dynamic range making it an ideal system for large events. Thanks to the cardioid design, we achieve a rear attenuation of -15 dB in the range of 63 Hz – 200 Hz.

LARA® incorporates 2 x 12″ woofers with a 4″ voice coil plus another 2 x 8″ in cardioid configuration; for the midrange, it uses another 2 x 8″ speakers with 2.5″ voice coils. The high-frequency section is made up of two DAS M-78N compression drivers, with 3″ voice coils and a 100º horizontal dispersion waveguide. All the elements have been designed and purpose-built to maximize the system’s efficiency.

The LARA® class D amplifier integrates a switching power supply with power factor correction (PFC), ensuring maximum performance and efficiency regardless of the mains voltage. Each amplifier provides 6000Wrms divided into eight channels, 3 of them in bridge mode to feed the 2 x 12″ and the two compression drivers. The remaining two channels feed the front 2 x 8″ and rear 2 x 8″ transducers.

The 3-point rigging system works for both LARA® and LARA® SUB, allowing us to hang arrays of up to 24 LARA units and 16 LARA® SUB units. The FSS TM (Fast Set Splay) angulation system allows angles to be adjusted in steps of 1º, from 0º to 7º from the stacked position, significantly reducing assembly time.

Frequency Range (-10 dB)63 Hz – 17 kHz
Horizontal Coverage (-6 dB)100º
Vertical CoverageSplay Dependent
Maximum Peak SPL at 1 m146 dB
Electronics and Connectors
Nominal Amplifier Power (continuous)6000 W
Input TypeBalanced – AES/EBU
Input Impeadance20 kohms
Input Sensitivity6.2 V (+18 dBu)
Audio Signal Input Connector1 x Female XLR
Audio Signal Loop Thru Connector1 x Male XLR
Audio/Data Input ConnectoretherCON
Audio + Data Loop Thru ConnectoretherCON
AC Output ConnectorpowerCON TRUE1
Current Draw 230 V / 115 V3.75 A/7.5 A
Enclosure ConstructionBirch Plywood
Enclosure GeometryTrapezoidal 7º
RiggingCaptive Rigging System
FinishISO-flex Paint
IP RatingIP43
Dimensions ( H x W x D )355 x 1.170 x 645 mm
14,0 x 46,0 x 25,4 in
Net Weight86,0 kg ( 189,6 lb )
LF Driver12GXNC
MF Driver8MXN
LF Cardioid Driver8GXN
HF DriverM-78N
Title Format Size
Data Sheet
HT_LARA_00.pdf PDF 1.14 Mb
Rigging Manual
Line Drawing
CAD_2D_LARA.dwg DWG 3.64 Mb
AX-LARARigging bumper for LARA (max 24 u.) and LARA-SUB (max 16 u.), black
AX-PULL-LARAPull-back hardware for the bottom box of a LARA array.
EC-090.9m CAT5e etherCON (data+audio) DASnet cable
EC-2020m CAT7 etherCON (data+audio) DASnet cable
ECPK-2020m Hybrid CAT7 etherCON (data+audio)+powerCON TRUE 1, DASnet cable
FRAME-AX-LARARigging frame for the AX-LARA, black
FUN-4-LARAProtective transport cover for 4 u. LARA on PL-LARA, black
JP-LARAJoining plate for array assembling LARA/LARA-SUB, black
PICK-UP-AX-LARAPick-up bar for the AX-LARA, black.
PL-LARASteel transport dolly for LARA (max 4 u.), black
PLINK1-090.9m powerCON TRUE1 cable
SPK18-20Socapex multipin power extension cord. 6 circuits, 20 m.
SPK18-6TRUE1Socapex multipin fan out. Socapex to 6 PowerCon True1
TOP-PL-LARAWooden transport support for 4 LARA on PL-LARA
V-AX-LARAV-shaped pivot plate for horizontal movement of the AX-LARA.
12GXNCLow-mid frequency 12″ speaker, 4″ VCD, ferrite magnet, 700 W AES, 8 ohm
8GXNLow-mid frequency 8″ speaker, 2.5″ VCD, neodymium magnet, 300 W AES, 8 ohm
8MXNLow-mid frequency 8″ speaker, 2.5″ VCD, neodymium magnet, 300 W AES, 8 ohm
GM-12GXRecone kit for 12GX speaker
GM-8MXRecone kit for 8MX speaker
GM-M75NDiaphragm for M-75N/M-75/M-80 compression driver
LITEMOD4HCClass D switching power supply PowerSoft amplifier, 4 x 750 W @ 4 ohm
M-78NCompression driver, 3″ VCD, neodymium magnet, 1.5″ throat, 100 W AES, 8 ohm

1. LARA Tutorial – Stack four LARA over PL LARA

2. LARA Tutorial – Transport mode and installation of AX-LARA

3. LARA Tutorial – From transport mode to flying with AX-LARA

4.1. LARA Tutorial – Flying four LARA cabinets

4.2. LARA Tutorial – Adding LARA cabinets to the array

4.3. LARA Tutorial – Flying cluster of two LARA SUB

LARA Tutorial – LARA and LARA SUB stack with JP-LARA

LARA Tutorial – Installation of GS-LARA

LARA Tutorial – Installation of TOP-LARA

LARA Tutorial – Cover over AX-LARA

LARA Tutorial – Functions of the LARA cover