News

Other products
of this series:
Series

DX-100i

Features

– 4 channel amplifier
– 2800 W per channel at 4 ohms
– Versatile, compact and highly energy-efficient
– Dante networked audio
 
The DX-100i are DSP processing  amplifiers that offer the same power outputs as the DX-100. The DX-100i accepts analogue, AES3 digital and optional Dante networked audio. The DX-100i can connect to any source and make it available over the network, as well as processing four additional channels with local analogue outputs to connect to non-DSP DX Series amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP DX amplifiers that have Dante cards fitted, or by any other Dante enabled device. Connectivity for remote control is covered by USB, Ethernet and RS485, with relay of either USB or Ethernet control via RS485 to work with legacy products.

Technical Data
Stereo Mode (both channels driven)
8 ohms EIA 1 kHz 1% THD
4 x 1400 W
4 ohms EIA 1 kHz 1% THD4 x 2800 W
2 ohms EIA 1 kHz 1% THD4 x 3500 W
Bridge Mono Mode
8 ohms EIA 1 kHz 1% THD
2 x 5600 W
4 ohms EIA 1 kHz 1% THD2 x 7000 W
Frequency Response0.5 dB (20 Hz - 20 kHz)
Total Harmonic Distortion (20 Hz-20 kHz)< 0,1 %
Damping Factor @ 8 ohms> 500
Voltage Gain32 dB
Output CircuitryClass D
AC Requirements7.5 A, 240 VAC (4 ohms)
15. A, 120 VAC (4 ohms)
Dimensions (H x W x D)8.8 x 48.2 x 42.8 cm
3.5 x 19 x 16.9 in
Weight10.9 kg (24) lb
Downloads
Configuration Guide using DX Amplifiers
Configuration guide using DX series amplifiers with SF, HQ, Artec, UX and WR series products.
Photo DX-100i

High Resolution, 0.7 MB

Photo DX Family

High Resolution, 1.8 MB

DX Amplifiers User Manual

PDF, 2 MB

DX Firmware update

Bin files, loader and instructions

DX Audiocore Software

Audiocore V9.29

DX Audiocore Presets

DX-80i DX-100i presets

DX Audiocore Presets for HQ

DX-80i DX-100i presets for HQ Series

DX-100i Spec Sheet

English, 2 MB





Subscribe to newsletter
 


Distributor search