Spare Parts

Other products
of this series:



Aero 50


- Three-way large-format line array module
- Two 15 loudspeakers with neodymium magnet assemblies
- Four 8 loudspeakers with neodymium magnetic assemblies
- Two neodymium compression driver with 1.5″ exit
- Captive rigging system integrated in the cabinet design
- Detachable front dolly panel

The large format Aero 50 is the evolution of the highly successful Aero 48. This externally powered, high efficiency line array module integrates low, mid and high frequency transducers in a single unit. Designed for use in large-scale events in stadiums and arenas, the Aero 50 offers a number of important improvements in terms of performance and weight reduction.

The low frequency reproduction is handled by two new 15GNR loudspeakers in a bass-reflex configuration. The 15GNR speaker incorporates a 100 mm (4″) edge-wound flat wire (EFW) voice coil and lightweight neodymium magnet assembly maximizing the dynamic response for a deep, precise bass. Four purpose-built 8MN, 8″ cone transducers incorporating neodymium magnetic assemblies and 62 mm (2.5″) voice coils are used for mid frequency reproduction. High frequency reproduction is handled by two M-75N compression drivers designed for use in high-level applications where abundant SPL and low distortion are mandatory. A pure titanium diaphragm featuring 75 mm (3″) copper-clad aluminum EFW voice coil yields high sensitivity, low distortion and extended frequency response.

The rugged, trapezoidal enclosure is built using Birch plywood and covered with a durable paint finish. The captive rigging system splay angles range from 0º to 9.6º and can be adjusted in 0.8º increments from 0º to 3.2º and 1.6º increments from 3.2º to 9.6 º allowing a wide range of column curvatures to be accomplished.

Technical Data
Frequency Range (-10 dB)45 Hz- 20 kHz
Horizontal Coverage (-6 dB)90º Nominal
Vertical CoverageSplay Dependent
RMS Power HandlingLF 2 x 700 W
MF: 700 W
HF: 300 W
On-axis Sensitivity 1 W / 1 mLF: 99 dB SPL
MF: 104 dB SPL
HF: 112 dB SPL
Rated Peak SPL at 1 mLF: 136 dB
MF: 139 dB
HF: 141 dB
Nominal ImpedanceLF: 8+8 ohms
MF: 8 ohms
HF: 16 ohms
Recommended Amplifier Power4 amps 2 x 1400 @ 4 ohms
4 units Aero 50
Enclosure MaterialBirch Plywood
Connectors2 x NL8 Neutrik speakON
Dimensions (H x W x D)47.5 x 135 x 62.7 cm
18.7 x 53.1 x 24.7 in
Weight85 kg (187 lb)
Aero 50 2D Drawing
303 KB
Aero 50 Configuration Guide

8 x side with D-100 amps
English, 9 MB

Aero 50 Configuration Guide

12 x side with D-100 amps
English, 9 MB

Aero 50 Configuration Guide with K-6 amps

English, 10 MB

Aero 50 Configuration Guide

8 x side with D-100 amps & powered subs
English, 6 MB

Aero 50 Configuration Guide

12 x side with D-100 amps & powered subs
English, 8 MB

FP1000Q Configuration Guide for Aero 50

English, 574 KB

VPL on PLM Set Guide with Aero 50

English, 230 KB

Aero 50 V5.5 DSP Parameters

For DSP-2060A/4080, Powersoft K-6 y Lake LM26/PLM 80KB

Photo Aero 50
Hi-Resolution, 557 KB
Aero 50 User Manual

English, 15 MB

AERO Rigging Systems
Bilingual, 45 KB
Quick release pin guide

Spanish & English, 5,6 MB

Aero 50 Rack User Manual

PDF, 17 MB

EFO Data Aero, Variant Series

Data files for Ease Focus V.1, 751 KB

GLL Data

Data files for Ease Focus V.2, Ease 4.3, 38 MB
Aero, Convert, Variant, Event Series Data

Aero 50 Spec Sheet
English, 308 KB

Subscribe to newsletter

Distributor search